Round end table with tapered legs made from reclaimed white oak barnwood . The 3” thick top is made of zinc metal with a custom patina and accent studs around the perimeter. (Dimensions: 24” diameter x 26” high)

Credenza

Dining Table

Desk made from 1.25” thick reclaimed white and red oak barnwood. The frame is made from 1” square raw tube steel.  The center drawer has flip down drawer face with a roll-out computer keyboard tray. The desk is finished in a grey stain with satin clear coat. The right and left drawers are 10”wide x 5”tall x 20”deep. (Dimensions: 52”w x 25”d x 30”tall)


Dresser

Coffee table made from reclaimed rustic pine barnwood with raw tube steel legs. Finish is natural. (Dimensions: 18" wide x 52" long x 16"tall x 2" thick) (Leg Dimensions: .75"x1.5")

Shelves in Art Nook

Kitchen Island Counter Top

Oak barn beam used as a train shelf over the entrance to a train enthusiasts display area. Beuatiful brown patina, mortises cut in top, knot and cracks on the front face and live edge on the front lower edge. (Dimensions: 8" tall by 8" deep by 37" long)
Saloon doors made from late 1800's reclaimed rustic pine barnwood. Natural finish. (Dimensions: Each door is 17.5" wide by 36" tall by 2" thick)

Saloon Doors

Sliding barn door made from late 1800's reclaimed rustic pine barnwood. Natural finish. (Dimensions: 36" wide by 82" tall by 2" thick)

Reclaimed Barnwood - Vintage Woodworkz -  Custom Reclaimed Barnwood Furniture - Michigan

Shelves made from reclaimed 1880’s elm barn wood with vintage cast iron wall brackets finished in a medium espresso color. Original circle sawn marks and live edges remain on the front of the shelves (Dimensions: 2” thick by 8-10” deep by 15-30” long)


Console Table

Conference Room Table

Faux mantel made from reclaimed rustic pine barnwood.  The mantel top is made from a 6” x 7” hand hewn beam. The plinths are made from a piece of 6” x 7” hand hewn beam that has been split in half. The base and apron are made from 1” x 12” reclaimed rustic pine.  (Dimensions of mantel: 56” wide x 60” tall x 7” deep).

Bar Top with Beam Supports

Coffee Table

Kitchen island counter top made from late 1800’s reclaimed  white oak barnwood.  Maintained character of original circle sawn marks,  distressing, insect marring and nail holes. (Dimensions: 42" wide by 102" long by 1.75" thick)

Dining Table

Reclaimed hand hewn rustic pine barn beams mounted to kitchen ceiling. The four rafter beams are 8.5” wide x 3.75” tall. The main cross beam is 7” tall x 8” wide.
Coffee table made from reclaimed elm barnwood with raw tube steel legs. Finish is light mocha with satin clear coat. (Dimensions: 21" wide x 21" deep x 16"tall x 3" thick) (Leg Dimensions: .75" x 1.5")

Loggia Mantel

Dresser made from reclaimed rustic pine barnwood. Recessed drawer panels are made using reclaimed grey-board that has been skip planed and joined together. The dresser top was made from 1.25” thick rustic pine boards that have been joined and sanded smooth. All surfaces have been sanded smooth and left with a natural finish. (Dimensions: 26”w x 21”d x 42”h)


Ceiling Box Beam

Mantels, Beam Shelves & Pedestals

Sliding barn door with horizontal planks made from reclaimed birch barnwood.  Maintained circle sawn marks, insect marring and distressing.  Natural waxed finish. (Dimensions: 35" wide by 96" tall by 2" thick)

Sliding Barn Door

Barn Door

We custom craft every individual reclaimed barnwood piece

to our customer's specifications. Below are just a few of

our handcrafted barnwood products.

Shelves made from 1880’s circle sawn sycamore beam mounted to vintage cast iron wall brackets. (Dimensions: Shelf on top is 3’ wide by 6” deep by 3 ½” thick. Shelf on bottom is 2’ wide by 6” deep by 3 ½” thick)


Bench made from 1880’s reclaimed elm barn wood with beveled Gothic arch on each end, arched front apron, cast iron clavos on the sides and top. Bench top is a bread board design with original nail holes and insect marring that provide authentic reclaimed character. (Dimensions: 5’ wide by 15” deep by 16” tall with 1 ¾” thick bench top)
Bread board design made from 1890’s reclaimed white oak barnwood mounted to 1” by 3” tubular raw steel legs. Maintained character of original mill marks, saw marks, distressing & black iron stains. The edges of the long sides of the table top feature beautiful quarter sawn ribbon grain.  (Dimensions: 42" wide by 96" long by 2" thick)
Pastry board made from maple and cherry wood with live edges. The lip on both sides is made from cherry and is 1.5” tall. The finish on the board is natural with no stain or clear coat. (Dimensions: 34”w x 28”d x .75” thick)
Tables made from cherry with live edges. Surface has been planed and sanded smooth with a matte clear coat applied. Legs are made from raw tube steel. Coffee table is made using two live edge boards to create bookend look. (Leg dimensions: .75” square tube x 15”wide x 25”tall / .75” square tube x 17”wide x 22”t all/ .75” x 1.5” angled tube x 16.2” wide on top x 18.6” wide on bottom x 18” tall. Table top dimensions: 19”wide x 22”long / 18”wide x 20”long / 26” wide x 52”long)


Ceiling Medallion

Bar top made from reclaimed rustic pine barn floor boards. Surface and edges have significant distressing with some live edges. The finish is natural with no stain or clear coat. End supports and plinths made from reclaimed 6” x 6” hand hewn pine barn beams.  (Dimensions: 20”wide x 13.5’long x 2.25”thick)

Dining Table & Benches with Zinc Top

Picture Frames

Coffee and End Tables

Computer Cabinet

Console, Coffee, Sofa & End Tables and Credenzas

Ceiling medallion made from reclaimed rustic pine barnwood. (Dimensions: 26" diameter x 1" thick)

Benches 

Serving tray made from reclaimed rustic pine barnwood. (Dimensions:6" tall x 30" long x 15" wide) 

Serving Tray

Beam Shelf

Three tiered architectural pedestals made from  8" x 8" reclaimed white oak barn beam.  Can be used as  architectural art/décor and other functional purposes. 
Unique coat rack made from reclaimed white oak circle sawn 7" x 7" barn beam with mortices, circle sawn 2" X 7" plank with live edge, angle iron and cast iron coat hooks. (Dimensions: 44” wide by 14” tall by 7” deep)

Round Top Dungeon Door


Oak barn beam mantel with beautiful brown patina, mortises cut in the top, large knot and cracks on the front face and live edge on the front lower edge. (Dimensions: 8” wide by 8” deep by 62” long)
Console table made from 1880’s curly maple with original live edges on the front of the upper and lower shelves. The table is done in a medium espresso color using a unique finishing process that allowsthe tiger grain to pop on the top surfaces. (Dimensions: 30” wide by 8” deep by 32” tall)

Banquette Table

Two tiered sofa table made from reclaimed  pin oak barnwood. The ends of table have curved steel manifolds. (Dimensions: 16”wide x 52” long x 30.5” high)
Shelf unit is made from reclaimed white oak barnwood and 1” diameter galvanized pipe. The shelves have been skip planed to leave a modest amount of original saw marks. The finish is natural with no stain or clear coat. (Dimensions: 30”w x 10”d x 25” tall)
Credenza made from rustic pine reclaimed barnwood.  The barnwood was cut into strips, stained different colors and assembled in a unique angular pattern. This piece has four doors that open 110 degrees each and has fixed shelves inside. The original distressing, saw marks and nail holes were maintained throughout this piece.  (Dimensions: 36” tall x 72” wide x 19” deep).

Doors

Kitchen nook shelves made from reclaimed white oak with dark grey stain. (Dimensions:6" tall x 30" long x 15" wide) 
Dual sliding barn door made from late 1800's reclaimed rustic pine barnwood. Finished in Cherry stain and satin clear coat. (Dimensions: 70" wide by 82" tall by 2" thick)
Shelves made from reclaimed white oak barnwood.   The finish is natural with no stain or clear coat. (Dimensions: 21”w x 7”d x  1.5" thick)

Faux Beam Mantel

Office Furniture

 Three tiered console table with radiused shelves made from reclaimed red and white oak barnwood with ½” diameter steel rod frame. (Dimensions:  17” wide x 80” long by 30” high)
Dining Table and benches made from late 1800's reclaimed white oak barnwood. The tops are zinc metal with a custom patina. Dimensions: Table is 36”wide x 93” long x 30” high. Benches are 15” wide x 84” long x 17” high.
Kitchen island counter top with curved eating counter made from late 1800’s reclaimed curly maple. Maintained character of original mill marks,  distressing, insect marring and nail holes. (Dimensions: 42" wide by 80" long by 1.75" thick)

Kitchen Island Counter Top

Beam Pedestals

Bread board design made from late 1800’s white oak barnwood mounted to 1” by 3” tubular raw steel legs. Maintained character of original mill marks, saw marks, distressing & black iron stains. Both breadboard ends have a live edge. The edges of the long sides of the table top feature beautiful quarter sawn ribbon grain.  (Dimensions: 42" wide by 96" long by 2" thick)

Beam & Plank Coat Rack

Shelves With Iron Support Brackets

Console Table

Banquette table made from 1880’s reclaimed curly maple barnwood mounted to an ornate cast iron base. The bread board design table top surface was skip planed to leave original mill marks and insect marring. The table top edges were left untouched with original circle sawn and mill marks. The table top is finished in a light espresso color. (Dimensions: 30" wide by 42" long by 32" tall with 1.75" thick)

Round End Table

Bunk beds made from reclaimed rustic pine barnwood. Posts are made from 3” x 4” beam material. Recessed end panels are made using reclaimed grey-board that has been skip planed and joined together. Safety rails and end panel frames are made from 1” thick rustic pine. Mattress supports are made from new pine boards. All pieces are assembled using mortise and tenon joinery. All surfaces have been sanded smooth and left with a natural finish. (Dimensions:  49”w x 86”l x 72”tall)


Counters & Bar Tops

Desk

Pastry Board

Kitchen island counter made from late 1800’s reclaimed  elm barnwood.  The planks used for this countertop have very unique grain and distressing. Maintained character of original circle sawn marks, distressing, insect marring and nail holes.  (Dimensions: 27" wide by 57" long by 2.5" thick)

Sofa Table with Curved Metal Ends

Round end table made from reclaimed red oak barnwood. Maintained original saw marks and nail holes. Shown in a natural finish. Base is made from .375” x 2” raw plate steel. (Dimensions of table: 1.75” thick top x 31” diameter x 34” tall).
Dining table made from reclaimed white oak barnwood mounted to cross-bar raw tube steel legs. Maintained character of original saw marks and distressing . Weathered finish with satin clear coat. (Dimensions: 48" wide by 96" long by 1.75" thick / Legs made from 2"x4" and 4"x4" raw tube steel)

Round End Table with Zinc Top

Shelves with Wood Corbel Supports

Picture frames made from rustic pine reclaimed barnwood. The boards have a natural finish. (Dimensions: 2" wide frame sides x 1" thick)

Beam Shelves

Shelf made from reclaimed 1880’s white oak barn beam. Natural finish with original circle sawn marks and live edges (Dimensions: 8” thick by 8" deep by 12"-42" long)


Beam Train Shelf

Bar Shelf

Beam Mantel

Console Table

Coffee Table

Bar tops made from reclaimed elm barnwood. The surface was skip planed to leave a significant amount of original saw marks. Some pieces have live edges. The finish is light espresso with satin clear coat. (Dimensions: 27" wide x 27" deep / 17”wide x 155”long x 1.8”thick / 27”wide x 152”long x 1.8”thick)

Kitchen 

Dining & Conference Tables

Ceiling Beams and Corbels

Ceiling box beam made from reclaimed rustic pine barnwood. (Dimensions: 8" wide x 8" tall x 14' long)

Coffee Table

Desk

Make-up Counter

Beam ceiling coffers made from pine. 

Ceiling Coffers

Petit mantle made from  reclaimed circle sawn white oak plank material with matching corbels.  (Dimensions: 28” wide by 5” tall by 4” deep)

Petite Mantle

Round top door made from red oak with full v-groove front panel and split v-groove panels on the rear. This custom size door was designed and fabricated to access a storage area under a winding staircase. The door is equipped with cast iron hinge straps, clavos and handle set. (Dimensions: 24” wide by 58” tall by 1 ¾” thick)
Console table made from 1880’s reclaimed elm barn ood with legs that are tapered in both a front and side view. Table top is a bread board design that was skip planed to leave the original character of the reclaimed wood. The table top edges were left untouched with original saw mill marks. The front apron is arched with cast iron clavos mounted on the front and side aprons. The table is finished in a medium espresso color. (Dimensions: 6’ wide by 15” deep by 32” tall with 1 7/8 ” thick table top)


Reclaimed rustic pine barn beam mantel with beautiful brown patina and original mortises cut in the top. The mantel is supported by two angled corbels made from the same beam material. (Dimensions: 9” wide by 8” tall by  11' long)
Dining table made from late 1800’s pin-oak mounted to 1” by 3” tubular raw steel legs. Maintained character of original saw marks and distressing .  (Dimensions: 42" wide by 80" long by 1.75" thick)
Coffee table made from reclaimed rustic pine barnwood with wood legs. Finish is natural. (Dimensions: 21" wide x 54" long x 17"tall x 2" thick) (Leg Dimensions: 3"x5")

Architectural Features

Bunk Beds

Console Table with Metal Frame

Make-up counter made from reclaimed elm barnwood.  The surface has been planed to leave little distressing. The counter is cantilevered from the wall using angular supports. A 12” x 18” zinc plate with a rustic patina was added on the right side for placement of a hot curling iron. A Power chord access hole was added at the back of the counter. (Dimensions: 32”wide x 18”deep x 2.75”thick)
Computer cabinet made from 1.25” thick reclaimed white and red oak barnwood with a live edge on the top. Cabinet has a single large drawer on the bottom that is 39”wide x 20”deep x 12” tall. The desk is finished in a grey stain with satin clear coat. (Dimensions: 42” wide x 22” deep x 36” tall)


Shelves with Iron Pipe

Beam divider wall made from 4"x 5" and 3" x 5" reclaimed rustic pine barnwood beams. Outside frame and horizontal cross bars made from 4" x 5" beams. Diagonals made from 3" x 5" beams.

Bar Tops

Kitchen island counter made from late 1800’s reclaimed  red oak barnwood.  Maintained character of original circle sawn marks, distressing, insect marring and nail holes.  (Dimensions: 30" wide by 48" long by 1.75" thick)
Ceiling beams made from 3" x 5" reclaimed rustic pine barn beams. Corbels are made from the same beam material and measure 4" tall x 3" wide x 6" long.

Ceiling Beams

Dining Room feature wall made from 1.75" wide x 1" thick x 13' long reclaimed rustic pine barnwood strips with 1/2" gap between each board. The wall behind the boards is painted black to create depth between the boards.

Barnwood Feature Wall

Beam Mantel

Bar shelf made from brown board with live edge along entire length of board. Board has beautiful brownish red patina with wear marks/grooves cut in the top of it and knots in several places. Three corbels support the shelf and are made with live edge board. (Dimensions: 1”thick by 9” deep by 9’ long)

Bench

Console table made from 1880’s curly maple planks with the original saw mill marks on the edges of the table top. The table top has a natural finish and is mounted to powder coated black 3”x 3” angle iron legs that are tapered from top to bottom. (Dimensions: 36” wide by 15” deep by 32” tall with 2” thick table top)

Bedroom Furniture

Kitchen Island Counter Top

Shelves 

Beam Mantel

Kitchen Island Counter Top

Shelf made from reclaimed white oak barnwood.   The finish is natural with no stain or clear coat. (Dimensions:  70”w x 9”d x  1.5" thick)
Mantel made from 8” x 8” reclaimed hand hewn pine barn beam. Corbels have been made from the same material and are recessed into the masonry. The mantel has a natural finish. (Dimensions: 70” long x 8”tall x 8” deep)

Sliding Barn Door

Desk

Desk made from 1” thick circle sawn and milled red oak. The legs are made from .75" x 1.5" raw tube steel.  The cabinet has two adjustable shelves and there is  a rollout center drawer on the right side.. The desk is finished in a caramel color stain with satin clear coat.  (Dimensions: 52”w x 24”d x 31”tall)
Art nook  shelves made from reclaimed white oak with caramel colored stain (Dimensions: 2" thick x 32" wide x 15" deep) 

Shelves in Kitchen Nook

Beam Divider Wall

Desk made from 2” thick circle sawn reclaimed white oak with the legs designed to be similar to saw horses. The desk top has book matched boards with quarter sawn grain throughout. The desk is finished in a light mocha color with satin clear coat.  (Dimensions: 50”w x 21”d x 32”tall)

Shelf with Wood Corbel Supports

Barn Door

Dual sliding barn door made from late 1800's reclaimed rustic pine barnwood. Natural finish. (Dimensions: 70" wide by 82" tall by 2" thick)

Dining Table

Mantel with corbels made from an 1880’s reclaimed sycamore barn bean. The mantel has a natural finish with original nail holes, circle sawn marks and distressing. (Dimensions: 7’ wide by 6” deep by 3 1/2” thick)